MakeArmy Wiki

User Tools

Site Tools

Trace:
ortur-r2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
ortur-r2 [2025/10/24 13:32] – created lerheannonortur-r2 [2025/10/24 14:31] (current) – lerheannon
Line 3: Line 3:
  
 ===== Specifications ===== ===== Specifications =====
-  * **Laser Type:** Diode +  * **Laser Type:** Diode (455nm), Diode (1064nm) 
-  * **Model:** Ortur Laser Master R2+  * **Model:** Ortur R2
   * **Firmware:** GRBL-based   * **Firmware:** GRBL-based
-  * **Working Area:** Approx. 400 x 400 mm (varies by version)+  * **Working Area:**  Aproximately 300mm*210mm (varies by module)
   * **Connectivity:** USB   * **Connectivity:** USB
   * **Software Compatibility:** LightBurn, LaserGRBL   * **Software Compatibility:** LightBurn, LaserGRBL
-  * **Safety Features:** Active Position Protection, Exposure Duration Detection, and Voltage/Frequency Monitoring+  * **Safety Features:** Class 1 Laser Safety, Multi-sensor Flame Detection, Tilt Detection, Key Lock Protection
  
 ===== Common Issues ===== ===== Common Issues =====
-Some users report a “bounce-back” issue when the R2 completes a homing cycle. This occurs when the stepper motors disengage briefly after homing, causing a slight shift in position.+While reviewing this machine we've noticed a “bounce-back” issue when the R2 completes a homing cycle. This occurs when the stepper motors disengage briefly after homing, causing a slight shift in position.
  
 ===== Fixing the Homing Bounce-Back ===== ===== Fixing the Homing Bounce-Back =====
Line 45: Line 45:
   * `$1=50` → Motors disengage (manual movement possible)   * `$1=50` → Motors disengage (manual movement possible)
  
-I had no problems since I did that.   +"I had no problems since I did that. I hope this helps." — @kinofaya1143
-''I hope this helps.'' — @kinofaya1143+
  
 ===== References ===== ===== References =====
-  * [[https://ortur.net|Official Ortur Website]] +  * [[https://makearmy.io/portal/buying-guide?product=306|Ortur R2 Review]] 
-  * [[https://github.com/gnea/grbl/wiki/Configuring-Grbl-v1.1|GRBL Firmware Configuration Guide]] +  * [[https://ortur.net/products/ortur-r2-smart-laser-engraver?ref=makerremix|Ortur R2 - Official Website]] 
-  * [[https://lightburnsoftware.com|LightBurn Software]]+  * [[https://youtube.com/live/IfsjwtIpMvg?feature=share|YouTube Livestream Talking About Homing Issue]]
  
ortur-r2.1761312755.txt.gz · Last modified: by lerheannon