Differences

This shows you the differences between two versions of the page.

--- ortur-r2 [2025/10/24 13:59] – lerheannon
+++ ortur-r2 [2025/10/24 14:31] (current) – lerheannon
@@ Line 9: / Line 9: @@
   * **Connectivity:** USB
   * **Software Compatibility:** LightBurn, LaserGRBL
-  * **Safety Features:** Active Position Protection, Exposure Duration Detection, and Voltage/Frequency Monitoring
+  * **Safety Features:** Class 1 Laser Safety, Multi-sensor Flame Detection, Tilt Detection, Key Lock Protection
 ===== Common Issues =====
-Some users report a “bounce-back” issue when the R2 completes a homing cycle. This occurs when the stepper motors disengage briefly after homing, causing a slight shift in position.
+While reviewing this machine we've noticed a “bounce-back” issue when the R2 completes a homing cycle. This occurs when the stepper motors disengage briefly after homing, causing a slight shift in position.
 ===== Fixing the Homing Bounce-Back =====
@@ Line 45: / Line 45: @@
   * `$1=50` → Motors disengage (manual movement possible)
-I had no problems since I did that.
+"I had no problems since I did that. I hope this helps." — @kinofaya1143
-''I hope this helps.'' — @kinofaya1143
 ===== References =====
-  * [[https://ortur.net|Official Ortur Website]]
+  * [[https://makearmy.io/portal/buying-guide?product=306|Ortur R2 Review]]
-  * [[https://github.com/gnea/grbl/wiki/Configuring-Grbl-v1.1|GRBL Firmware Configuration Guide]]
+  * [[https://ortur.net/products/ortur-r2-smart-laser-engraver?ref=makerremix|Ortur R2 - Official Website]]
-  * [[https://lightburnsoftware.com|LightBurn Software]]
+  * [[https://youtube.com/live/IfsjwtIpMvg?feature=share|YouTube Livestream Talking About Homing Issue]]