MakeArmy Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Welcome to the FAQ! ======

Here you'll find answers to frequently asked questions about [[laser_engraving|[laser engraving]]]!\\
\\
Here are a list of some frequently asked questions about laser marking or cutting. This page will be developed as entries are added and needs evolve.\\
\\
=== Q. Why are my engravings on my "XX"watt gantry laser different on my "XX"watt galvo laser? ===
A. [[mitigating_gantry_galvo_discrepancies|Mitigating differences between gantry and galvo lasers.]]\\
\\
=== Q. How do laser settings like speed, power, frequency and pulse affect color marking? ===
A. [[laser_settings_vs_heat_for_color_marking|Laser settings, heat generation and color marking.]]\\
\\
Looking for frequently asked questions about Laser Everything?\\
Check out the [[le_faq|[LE FAQ]]] or\\
Head back to the [[start|[Start Page]]]